JAZ Products 270-008-NF Steel Can Fuel Cell, 8 Gallon

Description

Comes with a D-Ring bail handle cap assembly, It has a -8 AN fuel line hookup and return vent, The pickup hose is routed to the right rear corner, This 20 gauge steel can encloses a tough cross-link polyethylene cell, Kit includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap
JAZ Products 270-008-NF Steel Can Fuel Cell, 8 Gallon
Sku # 45820810
Mfr. Part # 270-008-NF
Condition
New
Brand
Jaz Products
Sold
Each
Details
Notes
Carefully determine the size of fuel cell needed. Depending on the capacity, a full fuel cell will generally weigh between 100 and 200 lbs. Buy the optimum size fuel cell to best accommodate weight bias and fuel consumption.
The fuel pickup comes in from the top center of the cell and has a hose attached to it that hangs down and rests against the bottom of the cell. It can be rotated if needed, depending on what direction you are planning to install the cell in your specific application.
These fuel tanks have no certification tags. They are approved for most racing where a bladder is not required.
The top lip sticks out 3/4" further on each side of the fuel cell.
Info
The 20 gauge steel can encloses a tough cross-link polyethylene cell. Includes fuel cell, steel can, IMCA required tip-over valve, and 4" diameter twist-on cap. Has a -8 AN fuel line hookup and return vent.
Safety foam sold separately.
Seamless cross-linked polyethylene inner shell
20 gauge welded steel container powder coated red
D-Ring bail handle cap assembly
Anodized -8 AN fuel pickup
Anodized -8 AN tip-over valve vent
Pickup hose routed to right rear corner
Note:
To meet the IMCA Sport Compact rules regarding the 8 gallon fuel cells, fuel tank flapper valve 458-315 must be purchased and used in conjunction with the fuel cell shown here. Or
purchase an IMCA approved cell with a flapper valve already installed.
Item Details
20-5/8" Long, 15-1/2" Wide, 8-3/8" Deep
26 lbs.
Specs
Material Type
Steel
Color
Red
Sold in Quantity
Each
Finish
Powder Coated
Fuel Cell Cap Style
D-ring Bail Handle
Outlet Fitting
-8 AN
MFG. Part #
270-008-NF
Safety Foam Included
No
Overall Height
8.38
Overall Width
15.5
Overall Length
20.63
GTIN Code
000270008003
Overall Width Range
15.00" to 15.99"
Overall Length Range
20.00" to 20.99"
Overall Height Range
8.00" to 8.99"
Return Fitting
-8 AN
Fuel Type
Gasoline | Alcohol | E85 | Nitrous
Outlet Fitting Quantity
1
Capacity
8
Reviews
worked great and would recommend to others
Rated
by mighty mike on March 03, 2021
Summary:
used it in our outlaw front wheel drive race car. Worked great
Jaz Steel can fuel cell- great price
Rated
by SprintPusher on March 12, 2011
Summary:
Hard to beat the Jaz fuel cells for the price. Shopped around a lot and as usual Speedway had the product at the best price. [...]
Pros:
Durable
Easy To Install
Yes, I recommend this product.
Related Items / Suggested Parts
JAZ Products 200-008-NF Polyethylene Fuel Cell, 8 Gallon
JAZ Polyethylene Fuel Cell, 8 Gallon, IMCA Approved
RCI 8 Gallon Steel Fuel Cell
Speedway/Jaz Fuel Cell Rollover Flapper Valve
Speedway Replacement Twist-On Fuel Cell Cap
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.